Limitation of Liabilities
All specifications, characteristics
and models set forth in this website are subject to change without
notice. Please call A.H. Systems for current price and specification
Under no circumstances will A.H. Systems,
Inc. be liable to any person or business entity for any direct, indirect,
special, incidental, consequential or other damages based on any
use of this Website or any other Website to which this site is linked.
Including without limitation, any lost profits, business interruption,
or loss of programs or information, even if A.H. Systems, Inc. has
been specifically advised of the possibility of such damages. A.H.
Systems, Inc. reserves the right to change any specification, design,
model and or other information without notice.
The materials used in fabrication
of the products have been inspected and to the best of our knowledge
and belief conform to specification requirements of the applicable
purchase order. Calibrations traceable to NIST standards are maintained
in our files for future reference.
Shipments to any destination are
made directly from our facility and shipments are made F.O.B. factory
(Chatsworth, CA USA). A.H. Systems will select the shipping method
on the basis of economy and delivery requirements unless directed
otherwise at the time the order is placed. Shipping charges are
usually prepaid and added to the invoice.
Rentals are subject to product availability.
Rental equipment must be returned in good condition with all manuals
and calibration data included. Charges will be made for damaged
or lost equipment.
Annual recalibration is important
to ensure repeatable, reliable performance. At our facility, A.H.
Systems calibrates our own antennas, as well as, most other brand
antennas in accordance with ARP, ANSI, and IEEE procedures. Calibration
data can be provided for 1, 3 and 10 meter distances.
This Website and all of the information
it contains are provided "AS IS" without warranty of any
kind, whether expressed or implied. All implied warranties, including,
without limitation, implied warranties of merchantability, fitness
for a particular purpose, and non-infringement, are hearby expressly
A.H. Systems Inc. warrants that
our Antennas, Sensors and Probes will be free from defects in materials
and workmanship for a period of three (3) years. All other products
delivered under contract will be warranted for a period of two (2)
Damage caused by excessive signals at the preamplifiers input is not covered under the warranty.
A.H. Systems' obligation under this warranty shall be limited
to repairing or replacing, F.O.B. Chatsworth, California, each part
of the product which is defective, provided that the buyer gives
A.H. Systems notice of such defect within the warranty period commencing
with the delivery of the product by A.H. Systems.
The remedy set forth herein shall be the only
remedy available to the buyer, and in no event shall A.H. Systems
be liable for direct, indirect, incidental or consequential damages.
This warranty shall not apply to any part of
the product which without fault of A.H. Systems has been subject
to alteration, failure caused by a part not supplied by A.H. Systems,
accident, fire or other casualty, negligence, misuse or normal wear
Except for the warranty set forth above, there
are no other warranties, expressed or implied, with respect to the
condition of the product or it's suitability for the use intended
for them by the buyer.
For prompt service, please contact our
service department for a Return Material Authorization before shipping
equipment back to us.
Shipments to any destination are made directly from our facility and shipments are made F.O.B. factory (Chatsworth, CA USA). A.H. Systems will select the shipping method on the basis of economy and delivery requirements unless directed otherwise at the time the order is placed. Shipping charges are usually prepaid and added to the invoice.
A restocking fee is applicable and at the discretion of A.H. Systems whenever the return
is due to "wrong item ordered," "customer does not like the product," "item no longer needed,"
or "changed mind". If you return the product, a 15% restocking fee will be charged. All cable
assemblies are made for each specific order and are non-cancellable
and not returnable.
A.H. Systems Inc. collects and uses
information from users of its websites and subscription services
in the following ways, each of which may involve the transfer of
information outside the United States. By using this website or
service you consent to this collection and use of information unless
you choose to opt out of any use, using the email options available
We may ask for further information
about you as part of online surveys or if you enter any competition
or other promotional feature. This information will be used to enable
us to improve our website or online service. It may also be disclosed
to other companies who may provide services of interest to you.
Contact details provided by
you (such as your name and your e-mail address) may be used occasionally
to tell you about important changes to the service or website and
its functionality. They may also be used by us and other businesses
within A.H. Systems, Inc. to provide you with information about
our services and products and disclosed to third party businesses
and advertisers for the same purpose. If you do not wish us to use
this information in this way, please send an e-mail
putting 'Remove me' in the subject line.
Cookies are small pieces of
information stored by us on your computer which enable us to identify
your computer when you access our services or websites. We may use
cookies to provide you with a convenient means of access, without
needing your password. We also use them to protect the integrity
of registered user names and passwords. We will not disclose information
Aggregate statistical information
provided by us to our advertisers or others regarding sales or website
usage will not include personally identifying information.
Changes to Privacy
Changes to this policy will
be posted here.
To Alter Your Details
If your personal information
changes you can alter your details by emailing sales @ AHSystems.com
and putting 'Change details' in the subject line.